Common Lubricating Oil

01  

L-AN total loss system oil  

L-AN total loss system oil (GB 443-1989) is a refined mineral lubricating oil, which is used instead of machine oil (GB 443-1984). It is suitable for general total loss lubrication system.  

02  

Spindle oil  

With refined mineral oil fractionation as the base oil, adding anti-oxidation, anti-rust and anti-wear additives, mainly suitable for precision machine tool spindle bearing lubrication and other pressure lubrication, splash lubrication, oil mist lubrication of sliding bearing or rolling bearing lubrication.  

03  

L - HL hydraulic oil  

It is a mineral type hydraulic sleeve with good oxidation resistance and rust resistance performance, mainly suitable for low-pressure gear pumps of machine tools and other equipment, anti-oxygen and rust bearings and gears, etc.  It is also used for silver-plated steel, copper friction pair and bronze steel friction pair of piston pump or other types of hydraulic pump with precision servo valve and filter.  

04  

L-HG hydraulic guide oil  

It is a mineral hydraulic oil with good oxidation resistance, rust resistance, wear resistance and stick-slip performance. It is mainly suitable for lubrication system of various machine tool guide rail and hydraulic system of machine tool.  

05  

L-HM anti-wear hydraulic oil  

With good anti-wear, anti-oxidation, anti-rust, anti-foam and other properties, suitable for medium and high pressure hydraulic system.  

06  

32SK-I CNC hydraulic fluid  

With high viscosity index refined mineral oil as the base oil, with anti-wear, anti-foam, anti-corrosion, viscosity and other properties, suitable for numerical control machine tool hydraulic system.  

07  

Rail oil  

It is made of refined mineral oil as base oil and added with additives such as oxidation resistance, oil resistance, rust prevention and adhesion. It is suitable for lubrication of all kinds of precision machine guide rails or impact vibration friction points, and can reduce the "creep" phenomenon of machine guide rails.  

08  

Industrial gear oil  

It is made of refined lubricating oil components as base oil, adding anti-wear, anti-oxidation, anti-rust, anti-foam and other additives, suitable for industrial equipment gear lubrication.  

09  

Turbine oil  

Recirculation oil, also known as turbine oil or turbine oil, is mainly used for bearing, gear and governor lubrication of high speed turbine or steam turbine of thermal power generation.  This oil has a wide range of applications due to its durability and stability despite its high temperature. It can replace many common types of oil.  

10  

Compressor oil  

Compressor oil is mainly used in air and other gas compressors, its main characteristic is good stability, in the compressor cylinder is not easy to occur carbon formation.  Because the circulating oil is also consistent with the characteristics of good stability and not easy to carbon, so in order to simplify the type of oil, those who need compressor oil can use circulating oil.  

11  

Transformer oil  

Transformer oil is also known as insulation oil, low viscosity, light yellow, mainly for oil-immersed transformer insulation and heat dissipation, is also suitable for oil switch insulation and reduce jump fire and other very low viscosity lubrication.  Transformer oil is an extremely dry oil, which has no moisture, so it must be properly covered and sealed and stored in the room.  

12  

Cylinder oil  

Cylinder oil, also known as steam cylinder oil, is a brown-yellow oil with high viscosity and high temperature resistance.  The cylinder oil containing animal fat such as butter can reduce the scouring effect of water on the steam engine cylinder at high temperature and improve the lubrication and wear resistance efficiency.  

13  

Frozen oil  

Refrigerating oil, also known as ice car oil, is a kind of lubricating oil with a very low freezing point or flow point, and can be durable. It is mainly used for lubrication of various reciprocating refrigerators.  If the refrigerating oil is used for electric refrigerators, air conditioners, etc., it should not contain any moisture, so as not to freeze in the refrigeration system and block the channel.  If the refrigerator is centrifugal and the bearing oil is not mixed with the refrigerant, it can usually be lubricated with circulating oil instead of refrigerating oil.  

14  

General motor oil  

General purpose oil is used for general lubrication and engine flushing, called general purpose oil.  General engine oil is also divided into SAE10, 20, 30, 40, 50 and so on according to the viscosity of SAE.  

15  

Machine oil  

Mechanical oil, commonly known as hongche or maxin oil, is an inexpensive lubricating oil for general mechanical lubrication.  Mechanical oil added to the machine parts after lubrication, can not be recycled or recycled.  

16  

Tooth line oil  

Tooth cable oil is an extremely thick black oil used primarily for lubrication of exposed gears and cables.  According to the different viscosity of the gear oil is divided into 0, 1, 2, 3, 5, the larger the number, the higher the viscosity, the more suitable for high temperature lubrication.  The low viscosity of the cable oil can flow at room temperature, while the high viscosity can flow only after heating.  

17  

Black oil  

Black oil, also known as pallet axle oil, is black, and its viscosity is about SAE 50. It is mainly used for lubrication of flat bearings with coarse gap (such as pallet axle, etc.).  

18  

Water soluble oil  

Dissolved water oil is also known as water transfer oil, mineral oil archaic oil or emulsified oil, oil contains emulsifier, so dissolved water oil added to the water after the emulsification into milk, for hydraulic system, cutting, metal processing and other lubrication.  To prepare water-oil emulsion, the oil must be poured into water and stirred vigorously.  Dissolved water oil without adding water has good anti-rust properties and can be used for anti-rust of iron and steel or non-ferrous metals.  

19  

Cutting oil  

The cutting oil is mainly used to protect the turning tool during metal cutting and enhance the smoothness of processing supplies.  For general cutting, it can be lubricated and cooled with spindle oil or general purpose oil.  Metals that are not easy to cut, ductile metals, etc., must be lubricated by special cutting oil containing chlorine, sulfur and other extreme pressure additives.  

20  

The quenching oil  

Quenching oil is mainly used for metal processing products quenching or heat treatment.  

24  

Heat conduction oil  

Heat conduction oil is mainly used for indirect heating and constant temperature in heaters or heating furnaces.  

25  

Spinning oil and carding oil  

Spinning oil and carding oil are applied to wool by woolen mills during carding for lubrication and treatment of wool.  

26  

There is no spot oil  

Spot free oil refers to easy to remove lubricating oil, mainly for knitting machine lubrication, the oil pollution of the fabric, easy to wash away with water.  Dissolved water oil can be used instead of this oil.  

27  

Rubber softening oil  

The main rubber softening oil for rubber factories in the production of rubber products in the preparation of rubber used in oil.